Lead4Pass 156-315.81 dumps 2023 update Fully upgraded! Contains 563 latest exam questions and answers, verified by a professional team to be true and effective!
For easier learning for candidates, Lead4Pass 156-315.81 dumps provide PDF and VCE practice formats, both learning methods contain the latest exam questions and answers!
You are welcome to download 156-315.81 dumps with PDF and VCE: https://www.lead4pass.com/156-315-81.html, you are guaranteed 100% success in passing the exam.
And part of Lead4Pass 156-315.81 dumps free online download:https://drive.google.com/file/d/1uz79cTGht-ssMbdk8748Cfpo6lkb_OYi/
You can also participate in the CheckPoint 156-315.81 online exam practice
Question 1:
Which two Cluster Solutions are available under R81.10?
A. ClusterXL and NSRP
B. VRRPandHSRP
C. VRRP and IP Clustering
D. ClusterXL and VRitP
Correct Answer: D
Question 2:
What kind of information would you expect to see using the sim affinity command?
A. The VMACs used in a Security Gateway cluster
B. The involved firewall kernel modules in inbound and outbound packet chain
C. Overview of SecureXL templated connections
D. Network interfaces and core distribution used for CoreXL
Correct Answer: D
Question 3:
What is the port used for SmartConsole to connect to the Security Management Server?
A. CPMI port 18191/TCP
B. CPM port/TCP port 19009
C. SIC port 18191/TCP
D. https port 4434/TCP
Correct Answer: A
Question 4:
Why would an administrator see the message below?

A. A new Policy Package created on both the Management and Gateway will be deleted and must be backed up first before proceeding.
B. A new Policy Package created on the Management is going to be installed to the existing Gateway.
C. A new Policy Package created on the Gateway is going to be installed on the existing Management.
D. A new Policy Package created on the Gateway and transferred to the Management will be overwritten by the Policy Package currently on the Gateway but can be restored from a periodic backup on the Gateway.
Correct Answer: B
Question 5:
What is the minimum amount of RAM needed for a Threat Prevention Appliance?
A. 6 GB
B. 8GB with Gaia in 64-bit mode
C. 4 GB
D. It depends on the number of software blades enabled
Correct Answer: C
Question 6:
An established connection is going to www.google.com. The Application Control Blade Is inspecting the traffic. If SecureXL and CoreXL are both enabled, which path is handling the traffic?
A. Slow Path
B. Fast Path
C. Medium Path
D. Accelerated Path
Correct Answer: D
Question 7:
A sticky Decision Function (SDF) is required to prevent which of the following? Assume you set up an Active-Active cluster.
A. Symmetric routing
B. Failovers
C. Asymmetric routing
D. Anti-Spoofing
Correct Answer: C
Question 8:
How can the SmartView application access?
A. http:///smartview
B. http://:4434/smartview/
C. https:///smartview/
D. https://:4434/smartview/
Correct Answer: C
Question 9:
You want to store the GAIA configuration in a file for later reference. What command should you use?
A. write mem
B. show config -f
C. save config -o
D. save configuration
Correct Answer: D
Question 10:
After the initial installation on the Check Point appliance, you notice that the Management- interface, and default gateway are incorrect.
Which commands could you use to set the IP to 192.168.80.200/24 and default gateway to 192.168.80.1?
A. set interface Mgmt ipv4-address 192.168.80.200 mask-length 24set static-route default next hop gateway address 192.168.80.1 on save config
B. set interface Mgmt ipv4-address 192.168.80.200 255.255.255.0add static-route 0.0.0.0.0.0.0.0 gw 192.168.80.1 on save config
C. set interface Mgmt ipv4-address 192.168.80.200 255.255.255.0set static-route 0.0.0.0.0.0.0.0 gw 192.168.80.1 on save config
D. set interface Mgmt ipv4-address 192.168.80.200 mask-length 24add static-route default next hop gateway address 192.168.80.1 on save config
Correct Answer: A
Question 11:
What is the difference between an event and a log?
A. Events are generated at the gateway according to Event Policy
B. A log entry becomes an event when it matches any rule defined in the Event Policy
C. Events are collected with SmartWorkflow from Trouble Ticket systems
D. Log and Events are synonyms
Correct Answer: B
Question 12:
Using fw monitor you see the following inspection point notion E and I what does that mean?
A. E shows the packet before the VPN encryption, I after the inbound firewall VM
B. E shows the packet reaching the external interface, leaving the internal interface
C. E shows the packet after the VPN encryption, I before the inbound firewall VM
D. E shows the packet leaving the external interface, I reach the internal interface
Correct Answer: C
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_CLI_Reference Guide/Topics-CLIG/FWG/fw-monitor.html (for example, eth4:i) Pre-Inbound – Before the inbound FireWall VM E (for example, eth4:E) Post-Outbound – VPN Outbound after encrypt
Question 13:
What is false regarding a Management HA environment?
A. Only one Management Server should be active, while any others be in standby mode
B. It is not necessary to establish SIC between the primary and secondary management server since the latter gets the exact same copy of the management database from the prior.
C. SmartConsole can connect to any management server in Readonly mode.
D. Synchronization will occur automatically with each Publish event if the Standby servers are available.
Correct Answer: B
Question 14:
To add a file to the Threat Prevention Whitelist, what two items are needed?
A. File name and Gateway
B. Object Name and MD5 signature
C. MD5 signature and Gateway
D. IP address of Management Server and Gateway
Correct Answer: B
Question 15:
What are the correct steps for upgrading a HA cluster (M1 is active, M2 is passive) using Multi- Version Cluster(MVC)Upgrade?
A. 1) Enable the MVC mechanism on both cluster members #cphaprob MVC on 2) Upgrade the passive node M2 to R81.10 3) In SmartConsole, change the version of the cluster object 4) Install the Access Control Policy and make sure that the installation will not stop if installation on one cluster member fails 5) After examining the cluster states upgrade node M1 to R81.10 6) On each Cluster Member, disable the MVC mechanism
B. 1) Enable the MVC mechanism on both cluster members #cphaprob MVC on 2) Upgrade the passive node M2 to R81.10 3) In SmartConsole, change the version of the cluster object 4) Install the Access Control Policy 5) After examining the cluster states upgrade node M1 to R81.10 6) On each Cluster Member, disable the MVC mechanism and Install the Access Control Policy
C. 1) In SmartConsole, change the version of the cluster object 2) Upgrade the passive node M2 to R81.10 3) Enable the MVC mechanism on the upgraded R81.10 Cluster Member M2 #cphaconf MVC on 4) Install the Access Control Policy and make sure that the installation will not stop if installation on one cluster member fails 5) After examining the cluster states upgrade node M1 to R81.10 6) On each Cluster Member, disable the MVC mechanism and Install the Access Control Policy SmartConsole, change the version of the cluster object
D. 1) Upgrade the passive node M2 to R81.10 2) Enable the MVC mechanism on the upgraded R81.10 Cluster Member M2 #cphaconf MVC on 3) In SmartConsole, change the version of the cluster object 4) Install the Access Control Policy 5) After examining the cluster states upgrade node M1 to R81.10 6) On each Cluster Member, disable the MVC mechanism and Install the Access Control Policy upgrade the passive node M2 to R81.10
Correct Answer: C
…
We are just porters of knowledge, helping you make rapid progress by sharing 156-315.81 exam materials!
Now, study Lead4Pass 156-315.81 dumps: https://www.lead4pass.com/156-315-81.html (563 Q&A), use PDF and VCE to help you practice learning goals efficiently, and ensure you pass the exam easily.